Λογότυπο Eταιρίας [302xX]
Πάνω Frame [668xX]
 
Αντλίες θερμότητος ΜΑΧΑ
 
 
Water heater
 
Enerbis Solar
 
 
Water proff cover for air conditioner 800 x 600 x 350 mm

Specifications

  • Textile material (650gr / m²) of ecru color.
  • Durable 450 Denier polyester with PVC coating

  • 100% waterproofing and High Wind Resistance

  • Loops from the same material & 3mm rope polyester high strengthΑ

57,00€ 

MAXA CALIDO 200-S

The MAXA CALIDO heat pump, is delivered complete for the direct connection to the domestic hot water installation and it is ideal for residential as well as for light commecial applications such as hair salons, cafeterias or restaurants e.t.c where there is increased need for hot water.

The All-In-One heat pumps are installed very easily as they do not need any special components for their connection to the domestic hot water system. Also, they can be easily disconnected form one instalaltion and they can be transferred without any difficulty to any new location.

It is suitable for heating or cooling operation and it can be connected in casccade (master-slave mode) to acheive even larger heating or cooling capacities.

Performance
Heating capacity (1) Watt 1870 (+1200*)
Absorbed power (1) Watt 503 (+1200*)
Hot water tank capacity Lit 220
C.O.P. W/W 3,72
Energy efficiency (2)   A
Maximum water temperature °C 75°C *
Minimum start water temperature °C 10°C
Operation limits °C Min: -10°C  / Max: +43°C
Refrigerant R134a 920 gr
Technical Characteristics
Power / Frequency / Phases V/Hz/ph 220-240/1/50
Absorbed current (1) A 2,23 (+5,2*) 
Air flow m3/hr 450
Duct diameter (3) mm 177
Allowed pressure bar 10
Auxiliary heater kW 1,2
Solar exchanger surface m2 1,2
Auxiliary exchanger surface m2 -
Protection   IPX1
Sound level (4) dB(A) 46
Dimensions and weight
Dimensions (Dia.x H) mm Φ654 x 1638
Packing Dimensions mm 700 x 700 x 1760
Weight Kgr 113
Weight with full water Kgr 333

 

(*) Related to the supplementary e-heater. During disinfection, the water temp is shifted up to 70°C by auxiliary electrical heater

(1) Capacity and power input based on the following conditions: ambient temperature 20°C,water temperature from 15°C to 55°C

(2) Heating energy efficiency class, load profile: L. Refers to indoor air (+20°C). Reg. UE 812/2013

(3) The pipeline can be reduced from 177 to 160 mm by a reduction inserted into the end of the pipeline.

(4) Measured in free field at 1 m from the unit according to EN 12102 standard.

2.450,00€ 

MAXA CALIDO PENSILE 110

CALIDO PENSILE

Wall mounted heat pump for domestic hot water, made of S235 JR steel with internal enamel coating, thermic insulation in hard thick expanded polyurethane (PU) without CFC and HCFC.

  • External coating in metal sheet varnished with epossidic powders (white) and plastic material (ABS).
  • Mounting brackets for wall installation.
  • Magnesium anode for corrosion prevention.
  • Hydraulic links located on the bottom part.
  • Non submerged capacitor wrapped around the steel boiler.
  • Integrated electric resistance 1,5 kW 230V~ activable through switches located inside control panel for heating of ranging from 62°C (max temp with heating pump only) to 75°C.
  • Rotary compressor for maximum efficiency and reducing noise.
  • Centrifugal fan for canalization of the necessary air for the proper functioning of the heating pump.
  • Winged pack evaporator.
  • R134a refrigerant cooling fluid.
  • Complete electronic control with control panel equipped with LCD touch display, water temp gauge, bright functioning heating pump and electric resistance gauge, commands with relative gauges for the activation of the various functioning modes, warnings for eventual alarm malfunction, such as:

- Antilegionella function,

- Setting / display of date and hour,

- Hot water temperature setting,

- Timer and holiday function settings.

Performance
Heating capacity (1) Watt 610 (+1500*)
Absorbed power (1) Watt 250 (+1200*)
Hot water tank capacity Lit 110
C.O.P. W/W 2.45
Energy efficiency (2)   A
Maximum water temperature °C 75°C *
Minimum start water temperature °C 10°C
Operation limits °C Min: -10°C  / Max: +43°C
Refrigerant R134a 600 gr
Technical Characteristics
Power / Frequency / Phases V/Hz/ph 220-240/1/50
Absorbed current (1) A 1,14 (+5,2*) 
Air flow m3/hr 150 - 200
Duct diameter (3) mm 177
Allowed pressure bar 6,5
Auxiliary heater kW 1,5
Solar exchanger surface m2 -
Auxiliary exchanger surface m2 -
Protection   IPX1
Sound level (4) dB(A) 46
Dimensions and weight
Dimensions (L x H x D) mm 500 x 1270 x 520
Weight Kgr 75

(*) Related to the supplementary e-heater. During disinfection, the water temp is shifted up to 70°C by auxiliary electrical heater

(1) Capacity and power input based on the following conditions: ambient temperature 20°C,water temperature from 15°C to 55°C

(2) Heating energy efficiency class, load profile: L. Refers to indoor air (+20°C). Reg. UE 812/2013

(3) The pipeline can be reduced from 177 to 160 mm by a reduction inserted into the end of the pipeline.

(4) Measured in free field at 1 m from the unit according to EN 12102 standard.

1.700,00€ 

With choosen:
 
Positive SSL